To make you more familiar with the concepts of network switching and to get acquainted with the reputable vendors of network switches, we have prepared a number of blogs as a series, the different parts of which are as follows:

In this series of blogs you will come across a variety of terms, abbreviations, concepts, and technologies. We have tried to explain the general concepts and terms as much as possible in the first three parts of this series. In the following sections, we assume that you have read these two sections and therefore we will not re-explain these concepts and terms in the following sections. Of course, each vendor also has a number of specific terms and concepts that are explained in blogs related to the same vendor’s products.

Last note, all the content as well as the images used in this series of blogs are taken from the official websites of the reviewed vendors (Cisco, Microtik, HP and Dell).


 

 

Part 8 – HP Switches: Terms, and Access Switches

 

HP (Hewlett-Packard) is one of the most reputable companies in the field of network hardware. In particular, the network servers produced by this company are very popular. But the subject of this blog is the network switches produced by this company.

This company divides its switches into two categories:

  • Access
  • Core & Data Center

And of course it also puts data center switches in two categories:

  • Top-of-Rack Switches
  • Modular Chassis Switches

Note: In this post, G stands for Gigabit.

 

 

Concepts, and Technologies 

Aruba Dynamic Segmentation: This technology automatically separates traffic across wired and wireless networks.

Aruba NetEdit: It empowers IT teams to orchestrate the configuration of multiple switches with automation and analytics to ensure deployments are consistent, conformant, and free of errors. This arms IT teams with the power to smoothly coordinate end-to-end service roll outs, rapidly initiate network-wide changes, and ensure policy conformance after network updates. You can read more here

Aruba Network Analytics Engine: Aruba has developed the Network Analytics Engine (NAE), which is part of the AOS-CX network operating system. NAE provides a built-in framework for monitoring and troubleshooting networks. It automatically interrogates and analyzes network events to provide unprecedented visibility into outages and anomalies.

In fact, Aruba Network Analytics Engine offers network administrators the following benefits:

  • Faster, complete visibility
  • Simplified management
  • Continued innovation

This mobile app accelerates day zero configuration and deployment of switches running AOS-CX by offering easy to configure virtualized stacking and a fast and simple way to monitor PoE usage, and it makes it easy to import your switch into Aruba NetEdit. You can read more here

Aruba ClearPass Policy Manager: It provides role- and device-based network access control for employees, contractors and guests across any multivendor wired, wireless and VPN infrastructure. It is equipped with facilities such as built-in context-based policy engine, RADIUS, TACACS+ protocol support, device profiling and comprehensive posture assessment, onboarding, and guest access options. You can read more about it here.

Aruba AirWave: This is a versatile network management system (NMS) for enterprise campus wired, wireless, and remote connectivity. You can read more about it here

 

 

Access Switches 

These switches are:

  • Aruba CX 6400 Series
  • Aruba CX 6300 Series
  • Aruba CX 6200 Series
  • Aruba CX 6100 Series
  • Aruba 5400R Series
  • Aruba 3810 Series
  • Aruba 2930M Series
  • Aruba 2930F Series
  • Aruba 2540 Series
  • Aruba 2530 Series

 

 

ITperfection, network switching, HP, switches, access switches, aruba cx 6400

High-availability modular switches for versatile edge access to data center deployments. A cloud-centric design with a fully programmable OS. This series uses Aruba Dynamic Segmentation for IoT and workplace mobility. Also, this series uses Aruba Network Analytics Engine to Intelligent monitoring, visibility, and remediation.

The system switching capacity of this series is maximum 28 Tbps, and also system throughput capacity is maximum 11.4 Bbps (Billion Packet per Second).

Other Features:

  • Powerful modular Layer 3 switches
  • Supports BGP, EVPN, VXLAN, VRF, and OSPF
  • Supports QoS
  • One touch deployment with the Aruba CX Mobile App
  • Aruba NetEdit support for automated configuration and verification

The switches in this series are:

  • CX 6405 (R0X26A): It has 1x 6405 Chassis Switch (R0X24A), 1x Management Module (R0X31A), and 5 open module slots.
  • CX 6410 (R0X27A): It has 1x 6410 Chassis Switch (R0X25A), 1x Management Module (R0X31A), and 10 open module slots.
  • CX 6405 (R0X29A): It has 1x 6405 Chassis Switch (R0X24A), 1x Management Module (R0X31A), 1x R0X38B Line Card and 1x R0X39B Line Card for 96x 10/100/1000Base-T PoE+ ports supporting up to 30W per port and 4x 1/10/25/50G SFP ports, and 3 open module slots.
  • CX 6405 (R0X30A): It has 1x 6405 Chassis Switch (R0X24A), 1x Management Module (R0X31A), 2x R0X43A Line Card for 48x 1G/10G SFP+ ports and 8x 1/10/25/50G SFP ports, and 3 open module slots.
  • CX 6410 (JL741A): It has 1x 6410 Chassis Switch (R0X25A), 1x Management Module (R0X31A), 1x R0X38B Line Card and 1x R0X39B Line Card for 96x 10/100/1000Base-T PoE+ ports supporting up to 30W per port and 4x 1/10/25/50G SFP ports, and 8 open module slots.

Read more about this series: Datasheet

 

 

ITperfection, network switching, HP, switches, access switches, aruba cx 6300

These stackable layer 3 switches are very suitable for cloud, mobile, and IoT. It’s ideal for enterprise access, aggregation, core, and top of rack deployments. This series has built-in, high-speed uplinks and include models with 24 SFP+ ports and full-density 60W PoE with multi-gigabit Ethernet for a high-performance network.

The system switching capacity of this series is maximum 880 Gbps, and also system throughput capacity is maximum 660 Mpps (Maximum packets per second). The stacking bandwidth is 200 Gbps. A maximum of ten switches in this series can be placed in one stack.

Key Features:

  • Supports BGP, EVPN, VXLAN,VRF, and OSPF with robust security and QoS
  • Compact 1U
  • Built-in high speed 10GbE/25GbE/50GbE uplinks
  • Intelligent monitoring, visibility, and remediation with Aruba Network Analytics Engine
  • One touch deployment with the Aruba CX MobileApp
  • Aruba NetEdit support for automated configuration and verification

The switches in this series are:

  • CX 6300M (JL658A): It has 24x 1G/10G SFP+ ports, 4x 1/10/25/50G SFP ports.
  • 6300M (JL659A): It has 48x ports Smart Rate 100M/1G/2.5G/5GBaseT Class 6 PoE ports supporting up to 60W per port, and 4x 1/10/25/50G SFP ports. It delivers up to 2880W of Class 6 PoE Power
  • 6300M (JL660A): It has 24x ports Smart Rate 100M/1G/2.5G/5GBaseT Class 6 PoE ports supporting up to 60W per port, and 4x 1/10/25/50G SFP ports. It delivers up to 1440W of Class 6 PoE Power.
  • 6300M (JL661A): It has 48x ports 10/100/1000BaseT PoE+ ports supporting up to 30W per port, and 4x 1/10/25/50G SFP ports. 48 ports of full redundancy PoE+ Power with two 1600W PSUs.
  • 6300M (JL662A): It has 24x ports 10/100/1000BaseT PoE+ ports supporting up to 30W per port, and 4x 1/10/25/50G SFP ports. 24 ports of full redundancy PoE+ Power with two 1600W PSUs.
  • 6300M (JL663A): It has 48x ports 10/100/1000BaseT ports, and 4x 1/10/25/50G SFP ports.
  • 6300M (JL664A): It has 24x ports 10/100/1000BaseT ports, and 4x 1/10/25/50G SFP ports.
  • 6300M (JL762A): It has 48x ports 10/100/1000BaseT ports, and 4x 1/10/25/50G SFP ports.
  • 6300F (JL665A): It has 48x ports 10/100/1000BaseT PoE+ ports supporting up to 30W per port, and 4x 1/10/25/50G SFP ports. Up to 720W of PoE+
  • 6300F (JL666A): It has 24x ports 10/100/1000BaseT PoE+ ports supporting up to 30W per port, and 4x 1/10/25/50G SFP ports. Up to 370W of PoE+
  • 6300F (JL667A): It has 48x ports 10/100/1000BaseT ports, and 4x 1/10/25/50G SFP ports.
  • 6300F (JL668A): It has 24x ports 10/100/1000BaseT ports, and 4x 1/10/25/50G SFP ports.

Read more about this series: Datasheet

 

 

Aruba CX 6200 Switch Series (h3) This series is a family of stackable access switches ideal for enterprise branch offices and campuses, as well as SMBs. This series uses Aruba Dynamic Segmentation for IoT and workplace mobility. The system switching capacity of this series is maximum 176 Gbps, and also system throughput capacity is maximum 130.9 Mpps (Maximum packets per second). A maximum of eight switches in this series can be placed in one stack. Key Features: • Support for ACLs • Support for QoS • Supports common protocols such as static and Access OSPF routing • Convenient built-in 1/10GbE uplinks and up to 740W of Class 4 PoE • Troubleshooting with Aruba Network Analytics Engine • Simple deployment with the Aruba CX Mobile App • Automated configuration and verification with Aruba NetEdit The switches in this series are: • 6200F (JL724A): It has 24x ports 10/100/1000BaseT ports, and 4x 1/10G SFP+ ports. • 6200F (JL725A): It has 24x ports 10/100/1000BaseT ports, and 4x 1/10G SFP+ ports. Up to 370W of Class 4 PoE. • 6200F (JL726A): It has 8x ports 10/100/1000BaseT ports, and 4x 1/10G SFP+ ports. • 6200F (JL727A): It has 48x ports 10/100/1000BaseT PoE+ ports supporting up to 30W per port, and 4x 1/10G SFP+ ports. Up to 370W of Class 4 PoE. • 6200F (JL728A): It has 48x ports 10/100/1000BaseT PoE+ ports supporting up to 30W per port, and 4x 1/10G SFP+ ports. Up to 740W of Class 4 PoE Read more about this series: Datasheet

This series is a family of stackable access switches ideal for enterprise branch offices and campuses, as well as SMBs. This series uses Aruba Dynamic Segmentation for IoT and workplace mobility.

The system switching capacity of this series is maximum 176 Gbps, and also system throughput capacity is maximum 130.9 Mpps (Maximum packets per second). A maximum of eight switches in this series can be placed in one stack.

Key Features:

  • Support for ACLs
  • Support for QoS
  • Supports common protocols such as static and Access OSPF routing
  • Convenient built-in 1/10GbE uplinks and up to 740W of Class 4 PoE
  • Troubleshooting with Aruba Network Analytics Engine
  • Simple deployment with the Aruba CX Mobile App
  • Automated configuration and verification with Aruba NetEdit

The switches in this series are:

  • 6200F (JL724A): It has 24x ports 10/100/1000BaseT ports, and 4x 1/10G SFP+ ports.
  • 6200F (JL725A): It has 24x ports 10/100/1000BaseT ports, and 4x 1/10G SFP+ ports. Up to 370W of Class 4 PoE.
  • 6200F (JL726A): It has 8x ports 10/100/1000BaseT ports, and 4x 1/10G SFP+ ports.
  • 6200F (JL727A): It has 48x ports 10/100/1000BaseT PoE+ ports supporting up to 30W per port, and 4x 1/10G SFP+ ports. Up to 370W of Class 4 PoE.
  • 6200F (JL728A): It has 48x ports 10/100/1000BaseT PoE+ ports supporting up to 30W per port, and 4x 1/10G SFP+ ports. Up to 740W of Class 4 PoE

Read more about this series: Datasheet

 

 

ITperfection, network switching, HP, switches, access switches, aruba 6100 series

This Series is ideal for branch offices, mid-market enterprises, and SMBs. This series is layer 2 switch, and has PoE. The system switching capacity of this series is maximum 176 Gbps, and also system throughput capacity is maximum 98.6 Mpps (Maximum packets per second). This device also supports some of the features required in Layer 3.

Key Features:

  • Support for ACLs,
  • Robust QoS
  • Static routing
  • Convenient built-in 1/10GbE uplinks
  • Up to 370W of Class 4 PoE
  • Automated configuration and verification with Aruba NetEdit

The switches in this series are:

  • 6100 (JL675A): It has 48x ports 10/100/1000Base-T ports, 4x 1/10G SFP ports, Up to 370W of Class 4 PoE.
  • 6100 (JL676A): It has 48x ports 10/100/1000Base-T ports, and 4x 1/10G SFP ports.
  • 6100 (JL677A): It has 24x ports 10/100/1000Base-T ports, 4x 1/10G SFP ports, and Up to 370W of Class 4 PoE.
  • 6100 (JL678A): It has 24x ports 10/100/1000Base-T ports, and 4x 1/10G SFP ports.
  • 6100 (JL679A): It has 12x ports 10/100/1000Base-T ports, 2x 1/10G SFP ports, and Up to 139W of Class 4 PoE.

Read more about this series: Datasheet

 

 

ITperfection, network switching, HP, switches, access switches, aruba 5400 series

Modular Layer 3 access and aggregation switches. This series has upgraded to Aruba CX 6400. Anyway, this Layer 3 modular switch series has high-performance, low latency and resiliency. This series uses Aruba Dynamic Segmentation to keep traffic secure and separate.

The system switching capacity of this series is maximum 1920 Gbps, and also system throughput capacity is maximum 1142.8 Mpps.

Key Features:

  • Supports OSPF, IPv6, IPv4 BGP
  • Advanced security and network management via Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central
  • Robust QoS
  • Policy-based routing
  • Up to 288 ports of PoE+

The switches in this series are:

  • 5406R zl2 (J9821A): It has 6 open module slots, and Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination.
  • 5412R zl2 (J9822A): It has 12 open module slots, and supports a maximum of 288 autosensing 10/100/1000 ports or 288 SFP ports or 96 SFP+ ports or 96 HPE Smart Rate Multi-Gigabit or 24 40GbE ports, or a combination.
  • 5406R (J9823A): It has 44 RJ-45 autosensing 10/100/1000 PoE+, 2 open 10GbE SFP+ transceiver slots, 4 open module slots, and supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination.
  • 5412R (J9825A): It has 92 RJ-45 autosensing 10/100/1000 PoE+ ports, 2 open 10GbE SFP+ transceiver slots, 8 open module slots, and supports a maximum of 288 autosensing 10/100/1000 ports or 288 SFP ports or 96 SFP+ ports or 96 HPE Smart Rate Multi-Gigabit or 24 40GbE ports, or a combination.
  • 5406R (J9824A): It has 44 RJ-45 autosensing 10/100/1000 ports, 4 open mini-GBIC (SFP) slots, 4 open module slots, and supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination.
  • 5412R (J9826A): It has 92 RJ-45 autosensing 10/100/1000 PoE+ ports, 4 open mini-GBIC (SFP) slots, 8 open module slots, and supports a maximum of 288 autosensing 10/100/1000 ports or 288 SFP ports or 96 SFP+ ports or 96 HPE Smart Rate Multi-Gigabit or 24 40GbE ports, or a combination.
  • 5406R (J9868A): It has 8 RJ-45 10GbE ports, 8 open 10GbE SFP+ transceiver slots,   4 open module slots, and supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination.
  • 5412R (JL001A): It has 92 RJ-45 autosensing 10/100/1000 PoE+ ports, 4 open 10GbE SFP+ transceiver slots, 8 open module slots, and supports a maximum of 288 autosensing 10/100/1000 ports or 288 SFP ports or 96 SFP+ ports or 96 HPE Smart Rate Multi-Gigabit or 24 40GbE ports, or a combination.
  • 5406R zl2 (JL002A): It has 8 RJ-45 HPE Smart Rate Multi-Gigabit ports, 8 open 10GbE SFP+ transceiver slots, 4 open module slots, and supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination.
  • 5406R zl2 (JL003A): It has 44 RJ-45 autosensing 10/100/1000 PoE+ ports, 4 open 10GbE SFP+ transceiver slots, 4 open module slots, and supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination.
  • 5406R zl2 (JL095A): It has 16 open 10GbE SFP+ transceiver slots, 4 open module slots, and supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination.

Read more about this series: Datasheet

 

 

ITperfection, network switching, HP, switches, access switches, aruba 3810

Layer 3 access and aggregation switches. This series has upgraded to Aruba CX 6300, but this series has backplane stacking feature, and low latency and resiliency. The system switching capacity of this series is maximum 480 Gbps, and also system throughput capacity is maximum 285.7 Mpps.

Key Features:

  • Advanced security and network management via Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central
  • Modular line rate 10GbE and 40GbE ports for wireless aggregation
  • HPE Smart Rate for high-speed multi-gigabit bandwidth
  • PoE+ power

The switches in this series are:

  • 3810M (JL071A): 24 RJ-45 autosensing 10/100/1000 ports, all ports support MACSec.
  • 3810M (JL072A): 48 RJ-45 autosensing 10/100/1000 ports, all ports support MACSec.
  • 3810M (JL073A): 24 RJ-45 autosensing 10/100/1000 PoE+ ports, all ports support MACSec.
  • 3810M (JL074A): 48 RJ-45 autosensing 10/100/1000 PoE+ ports, all ports support MACSec.
  • 3810M (JL075A): 16 SFP+ fixed 1000/10000 SFP+ ports, all ports support MACSec.
  • 3810M (JL076A): 40 RJ-45 autosensing 10/100/1000 PoE+ ports, all ports support MACSec.
  • 3810M (JL428A):4SFP+, 48 RJ-45 autosensing 10/100/1000 PoE+ ports, Ports 1-48 support MACSec.
  • 3810M (JL429A): 4SFP+, 48 RJ-45 autosensing 10/100/1000 PoE+ ports, Ports 1-48 support MACSec.
  • 3810M (JL430A): 24 SFP+ fixed 1000/10000 SFP+ ports, all ports support MACSec.

Read more about this series: Datasheet

 

 

ITperfection, network switching, HP, switches, access switches, aruba 2930M

Layer 3 access switches with Smart Rate and High Power PoE. This series has upgraded to Aruba CX 6300. This series has Aruba Dynamic Segmentation feature. The flexible 2930M supports wire speed 10GbE and 40GbE uplinks, redundant dual modular power supplies for up to 1440 Watts of PoE, and new models with industry standard IEEE 802.3bt Class 6 that provide up to 60W of PoE per port.

The system switching capacity of this series is maximum 320 Gbps, and also system throughput capacity is maximum 112 Mpps.

Key Features:

  • 10 chassis backplane stacking
  • Supports static, RIP and access OSPF routing
  • Supports ACLs
  • Supports SDN
  • Robust QoS
  • Modular 10GbE or 40GbE uplinks and HPE Smart Rate , with up to 1440W PoE
  • Up to 60W PoE per port

The switches in this series are:

  • 24G (JL319A): It has 20 Autosensing 10/100/1000 ports, and 4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports.
  • 24G PoE+ (JL320A): It has 20 Autosensing 10/100/1000 PoE+ ports, and 4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports.
  • 48G (JL321A): It has 44 Autosensing 10/100/1000 ports, and 4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports.
  • 48G PoE+ (JL322A): It has 44 Autosensing 10/100/1000 PoE+ ports, and 4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports.
  • 40G 8 HPE Smart Rate PoE+ (JL323A): It has 36 Autosensing 10/100/1000 PoE + ports, and 4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports.
  • 40G 8 Smart Rate POE Class 6 (R0M67A): It has 36 Autosensing 10/100/1000 PoE ports, and 4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports.
  • 24 HPE Smart Rate PoE+ (JL324A): It has 24 Autosensing 1/2.5/5GBaseT ports PoE+
  • 24 Smart Rate POE Class 6 (R0M68A): It has 24 Autosensing 1/2.5/5GBaseT ports PoE Class 6

Read more about this series: Datasheet

 

 

ITperfection, network switching, HP, switches, access switches, aruba 2930F

Layer 3 access switches. This series has upgraded to Aruba CX 6200. Anyway, this series with enterprise-grade features that’s simple to secure, deploy and manage with Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central. This series supports built-in 10GbE uplinks, PoE+, Access OSPF routing, Dynamic Segmentation, robust QoS, RIP routing, and IPv6 with no software licensing required.

The system switching capacity of this series is maximum 176 Gbps, and also system throughput capacity is maximum 112 Mpps.

Other Features:

  • Supports Static, RIP and Access OSPF routing
  • Supports Dynamic Segmentation
  • Supports ACLs
  • Robust QoS

The switches in this series are:

  • JL253A: It has 24 RJ-45 autosensing 10/100/1000 ports, and 4 SFP+ 1/10GbE ports.
  • JL254A: It has 48 RJ-45 autosensing 10/100/1000 ports, and 4 SFP+ 1/10GbE ports.
  • JL255A: It has 24 RJ-45 autosensing 10/100/1000 PoE+ ports, and 4 SFP+ 1/10GbE ports.
  • JL256A: It has 48 RJ-45 autosensing 10/100/1000 PoE+ ports, and 4 SFP+ 1/10GbE ports.
  • JL258A: It has 8 RJ-45 autosensing 10/100/1000 PoE+ ports, and 2 SFP+ 1/10GbE ports.
  • JL259A: It has 24 RJ-45 autosensing 10/100/1000 ports, and 4 SFP+ 1GbE ports.
  • JL260A: It has 48 RJ-45 autosensing 10/100/1000 ports, and 4 SFP+ 1GbE ports.
  • JL261A: It has 24 RJ-45 autosensing 10/100/1000 PoE+ ports, and 4 SFP+ 1GbE ports.
  • JL262A: It has 48 RJ-45 autosensing 10/100/1000 PoE+ ports, and 4 SFP+ 1GbE ports.
  • JL557A: It has 48 RJ-45 autosensing 10/100/1000 PoE+ (740 WAT) ports, and 4 SFP+ 1GbE ports.
  • JL558A: It has 48 RJ-45 autosensing 10/100/1000 PoE+ (740 WAT) ports, and 4 SFP+ 1/10GbE ports.
  • JL692A: It has 8 RJ-45 autosensing 10/100/1000 PoE+ ports, and 2 SFP+ 1/10GbE ports.
  • JL693A: It has 8 RJ-45 autosensing 10/100/1000 PoE+ ports, 24 RJ-45 autosensing 10/100/1000 ports, and 2 SFP+ 1/10GbE ports

Read more about this series: Datasheet

 

 

ITperfection, network switching, HP, switches, access switches, aruba 2540

This device is a layer 2 access switch. Of course, this series has upgraded to Aruba CX 6100. The system switching capacity of this series is maximum 176 Gbps, and also system throughput capacity is maximum 112 Mpps.

Key features:

  • Static and RIP routing
  • Support ACLs
  • Robust QoS
  • Security and network management via Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central
  • Simple deployment with Zero Touch Provisioning
  • Convenient 10 GbE uplinks and up to 370 W PoE+

The switches in this series are:

  • JL354A: It has 24 RJ-45 autosensing 10/100/1000 ports, and 4 SFP+ 1/10GbE ports.
  • JL355A: It has 48 RJ-45 autosensing 10/100/1000 ports, and 4 SFP+ 1/10GbE ports.
  • JL356A: 24 RJ-45 autosensing 10/100/1000 PoE+ ports, and 4 SFP+ 1/10GbE ports.
  • JL357A: 48 RJ-45 autosensing 10/100/1000 PoE+ ports, and 4 SFP+ 1/10GbE ports.

Read more about this series: Datasheet

 

 

ITperfection, network switching, HP, switches, access switches, aruba 2530

office, and SMB deployments. These switches are full managed, and they deliver Layer 2 capabilities with enhanced access security, traffic prioritization, sFlow, and IPv6 host support. PoE+ models deliver up 370W to power access points, IP phones and cameras.

The system switching capacity of this series is maximum 104 Gbps, and also system throughput capacity is maximum 77.3 Mpps (Maximum packets per second).

Key Features:

  • Flexible Management via Aruba AirWave, Aruba Central, and Aruba ClearPass Policy Manager
  • Right size deployment with choice of 8, 24 and 48 port Gigabit and Fast Ethernet models
  • Up to 370W PoE+ to power IoT, APs and cameras

The switches in this series are:

  • J9772A: It has 48 RJ-45 autosensing 10/100/1000 PoE+ ports, and 4 fixed Gigabit Ethernet SFP ports.
  • J9773A: It has 24 RJ-45 autosensing 10/100/1000 PoE+ ports, and 4 fixed Gigabit Ethernet SFP ports.
  • J9774A: It has 48 RJ-45 autosensing 10/100/1000 PoE+ ports, and 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port or as a SFP slot ports.
  • J9778A: It has 48 RJ-45 autosensing 10/100 PoE+ ports, and 2 fixed Gigabit Ethernet SFP ports, and 2 autosensing 10/100/1000 ports.
  • J9779A: It has 24 RJ-45 autosensing 10/100 PoE+ ports, and 2 fixed Gigabit Ethernet SFP ports, and 2 autosensing 10/100/1000 ports.
  • J9780A: It has 8 RJ-45 autosensing 10/100/1000 PoE+ ports, and 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port or as a SFP slot ports.
  • J9775A: It has 48 RJ-45 autosensing 10/100/1000 ports, and 4 fixed Gigabit Ethernet SFP ports.
  • J9776A: It has 24 RJ-45 autosensing 10/100/1000 ports, and 4 fixed Gigabit Ethernet SFP ports.
  • J9777A: It has 8 RJ-45 autosensing 10/100/1000 ports, and 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port or as a SFP slot ports.
  • J9781A: It has 48 RJ-45 autosensing 10/100 ports, and 2 autosensing 10/100/1000 ports, and 2 fixed Gigabit Ethernet SFP ports.
  • J9782A: It has 24 RJ-45 autosensing 10/100 ports, and 2 autosensing 10/100/1000 ports, and 2 fixed Gigabit Ethernet SFP ports.
  • J9783A: It has 8 RJ-45 autosensing 10/100 ports, and 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port or as a SFP slot ports.
  • JL070A: It has 8 RJ-45 autosensing 10/100 PoE+ ports, and 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port or as a SFP slot ports.

Read more about this series: Datasheet

 

 

…………………………………….

Source: In preparing this blog, we have tried to use the documents and content available on the official website of the manufacturer of HP switches, namely the website arubanetworks.com.com. All information is based on the contents of this website, also, all pictures have been downloaded from this website.

 

 

Read other blogs related to this series: